Shivsrushti Surgimed Private Limited

Meropenem injection is a powerful, broad-spectrum carbapenem antibiotic used in hospitals to treat severe, complicated bacterial infections, including pneumonia, intra-abdominal infections, meningitis, and skin infections. It works by killing bacteria and is often used for resistant strains or when other antibiotics fail.

Bupivacaine hydrochloride injection is a long-acting amide-type local anesthetic used to produce local or regional anesthesia/analgesia for surgery, dental procedures, and pain management. It acts by blocking nerve signal transmission, numbing areas for up to 72 hours. It is widely used in spinal anesthesia, epidurals, and surgical site infiltration.

Bupivacaine hydrochloride injection is a long-acting amide-type local anesthetic used to produce local or regional anesthesia/analgesia for surgery, dental procedures, and pain management. It acts by blocking nerve signal transmission, numbing areas for up to 72 hours. It is widely used in spinal anesthesia, epidurals, and surgical site infiltration.

TREONAM 1000 MG Injection – Meropenem IP

Brand Name: TREONAM 1000 MG
Composition: Meropenem Injection IP 1000 mg
Manufacturer/Marketer: Veritaz Healthcare Limited
Dosage Form: Dry Powder for Injection
Packaging Type: Vial
Route of Administration: Intravenous (IV)
Prescription Required: Yes

Product Description:

TREONAM 1000 MG Injection contains Meropenem, a broad-spectrum carbapenem antibiotic used for the treatment of severe and complicated bacterial infections. Meropenem works by inhibiting bacterial cell wall synthesis, making it effective against a wide range of gram-positive and gram-negative bacteria, including multi-drug resistant strains.

TREONAM 1000 MG is widely used in hospital and ICU settings for critical infections, including respiratory tract infections, urinary tract infections, intra-abdominal infections, skin and soft tissue infections, and septicemia. It is trusted for its safety, efficacy, and reliability in managing severe bacterial infections.

Indications:

·         Severe respiratory tract infections

·         Complicated urinary tract infections

·         Intra-abdominal infections

·         Skin and soft tissue infections

·         Meningitis

·         Septicemia

Key Features:

·         Broad-spectrum carbapenem antibiotic

·         Effective against multi-drug resistant bacteria

·         Suitable for hospital and ICU use

·         Manufactured by a reputed pharmaceutical company

Storage Instructions:

Store in a cool, dry place below 25°C. Protect from light and moisture.

Note: To be administered only under the supervision of a qualified healthcare professional.

Product Name: PREULTRA 2.5 MG Injection

Brand: PREULTRA 2.5 MG
Content / Active Ingredient: Ceftazidime & Avibactam for Injection
Strength: 2.5 g (Ceftazidime 2 g + Avibactam 0.5 g)
Company / Manufacturer: BDR Pharmaceuticals
Pack Size: Single Vial (Dry Powder for Injection)

Product Description

PREULTRA 2.5 MG Injection is a sterile injectable antibiotic combination containing Ceftazidime and Avibactam, used for the treatment of serious and complicated bacterial infections, including infections caused by multidrug-resistant Gram-negative organisms.

Ceftazidime is a third-generation cephalosporin antibiotic that inhibits bacterial cell wall synthesis, while Avibactam is a non-beta-lactam beta-lactamase inhibitor that protects Ceftazidime from enzymatic degradation. This combination enhances antibacterial coverage and effectiveness against resistant strains.

The product is supplied as a dry powder for reconstitution and is intended for intravenous administration under the supervision of a qualified healthcare professional.

Key Features

·         Composition: Ceftazidime 2 g + Avibactam 0.5 g

·         Total Strength: 2.5 g per vial

·         Therapeutic Category: Antibiotic – Cephalosporin & Beta-lactamase inhibitor combination

·         Dosage Form: Sterile dry powder for IV infusion

·         Route of Administration: Intravenous use only

·         Prescription Status: Schedule H – Prescription medicine

·         Packaging: Single vial pack

·         Storage: Store in a cool, dry place below recommended temperature

Indications / Uses

PREULTRA 2.5 MG Injection is indicated for:

·         Complicated intra-abdominal infections

·         Complicated urinary tract infections (including pyelonephritis)

·         Hospital-acquired and ventilator-associated pneumonia

·         Severe Gram-negative bacterial infections

·         Infections caused by carbapenem-resistant organisms (as advised by physician)

Dosage and duration of therapy should be determined by a healthcare professional based on infection severity and patient condition.

How It Works

Ceftazidime inhibits bacterial cell wall synthesis, leading to bacterial death. Avibactam inhibits certain beta-lactamase enzymes produced by resistant bacteria, thereby restoring the activity of Ceftazidime.

Important Notes

·         To be administered only under strict medical supervision.

.

 

MEROGRAM 125 MG Injection – Meropenem

Brand Name: MEROGRAM 125 MG
Composition: Meropenem Injection 125 mg
Manufacturer/Marketer: Aurobindo Pharma Ltd – Veritaz Division
Dosage Form: Dry Powder for Injection
Packaging Type: Vial
Route of Administration: Intravenous (IV)
Prescription Required: Yes

Product Description:

MEROGRAM 125 MG Injection contains Meropenem, a broad-spectrum carbapenem antibiotic used in the treatment of severe and complicated bacterial infections. It works by inhibiting bacterial cell wall synthesis and is effective against a wide range of gram-positive and gram-negative bacteria, including resistant strains.

This dosage strength is commonly used in pediatric cases or as prescribed by healthcare professionals based on patient requirements. It is widely utilized in hospitals and critical care settings.

Indications:

·         Severe respiratory tract infections

·         Complicated urinary tract infections

·         Intra-abdominal infections

·         Skin and soft tissue infections

·         Meningitis

·         Septicemia

Key Features:

·         Broad-spectrum carbapenem antibiotic

·         Effective against multi-drug resistant organisms

·         Suitable for hospital and ICU use

·         Manufactured by a reputed pharmaceutical company

Storage:

Store in a cool, dry place below 25°C. Protect from light and moisture.

Note: To be administered strictly under the supervision of a qualified healthcare professional only.

MEROGRAM S 1.5 GM Injection – Meropenem & Sulbactam

Brand Name: MEROGRAM S 1.5 GM
Composition: Meropenem 1 gm + Sulbactam 0.5 gm Injection
Manufacturer/Marketer: Aurobindo Pharma Ltd – Veritaz Division
Dosage Form: Dry Powder for Injection
Packaging Type: Vial
Route of Administration: Intravenous (IV)
Prescription Required: Yes

Product Description:

MEROGRAM S 1.5 GM Injection is a powerful broad-spectrum antibiotic combination containing Meropenem and Sulbactam. Meropenem is a carbapenem antibiotic that inhibits bacterial cell wall synthesis, while Sulbactam is a beta-lactamase inhibitor that enhances Meropenem’s effectiveness against resistant bacterial strains.

This combination is highly effective for severe and complicated infections, including those caused by multi-drug resistant organisms. It is widely used in hospitals, ICU settings, and critical care treatments.

Indications:

·         Severe respiratory tract infections

·         Complicated urinary tract infections

·         Intra-abdominal infections

·         Skin and soft tissue infections

·         Bone and joint infections

·         Septicemia

Key Features:

·         Broad-spectrum carbapenem + beta-lactamase inhibitor

·         Effective against resistant and multi-drug resistant bacteria

·         Suitable for hospital and critical care use

·         Manufactured by a trusted pharmaceutical company

Storage Instructions:

Store in a cool, dry place below 25°C. Protect from light and moisture.

Note: To be administered only under the supervision of a qualified healthcare professional.

category would be:

Pharmaceutical Medicines > Anti Infective Drugs & Medicines > Antibiotic Injection

MEROFIC PLUS 500 mg Injection — Meropenem Antibiotic

Brand: MEROFIC PLUS 500 mg
Content: Meropenem Injection I.P. 500 mg
Category: Carbapenem antibiotic (broad‑spectrum)
Form / Pack: Injectable powder for solution (vial)
Manufactured by: Gufic Bioscience Ltd (India)

Product Description

MEROFIC PLUS 500 mg Injection contains Meropenem, a potent broad‑spectrum carbapenem antibiotic used for the treatment of severe and complicated bacterial infections. It is a prescription medicine that is typically administered intravenously (IV) by a doctor or nurse in a hospital or clinical setting.

Meropenem works by inhibiting bacterial cell wall synthesis, which results in the destruction of susceptible bacteria (bactericidal action).

Therapeutic Uses

MEROFIC PLUS is indicated for the treatment of serious infections caused by bacteria, including:

• Severe respiratory tract infections (such as pneumonia)
• Complicated intra‑abdominal infections
• Skin and soft‑tissue infections
• Urinary tract infections
• Bloodstream infections (septicemia)
• Bacterial meningitis in appropriate age groups as judged by a physician

How It Works

Meropenem is a carbapenem‑class antibiotic that attacks the bacterial protective cell wall, stopping the bacteria from surviving and multiplying. This leads to effective bacterial killing and helps resolve severe infections.

Administration

• Administered intravenously (IV) by healthcare professionals.
• The dose, frequency, and duration depend on the type and severity of infection and should be decided by a clinician.
• Do not self‑administer.

Possible Side Effects

Some patients may experience:

• Nausea, vomiting, diarrhoea
• Headache, rash
• Injection‑site reactions
• Changes in blood counts or liver enzymes may occur during therapy — monitoring may be advised by the doctor.

Important Safety Notes

• Prescription medicine: Use only under medical supervision.
• Inform your doctor if you have allergies to carbapenem antibiotics or history of seizures, liver, or kidney disease before starting treatment.
• Regular monitoring of kidney function and blood counts may be recommended during treatment.
• Do not use for viral infections (e.g., cold, flu).

Merofic Plus 500 mg Injection

Brand: Merofic Plus 500 mg Injection
Content: Meropenem Injection I.P. 500 mg (Carbapenem antibiotic)
Company: Gufic Bioscience Ltd (India)
Form / Pack: Injectable powder for reconstitution and intravenous (IV) infusion or injection

What it is

Merofic Plus 500 mg is a prescription antibiotic injection containing the active ingredient meropenem, a broad‑spectrum carbapenem antibiotic used for treating serious bacterial infections under medical supervision. This medicine is typically administered in a hospital or clinical setting by a doctor or nurse.

How it works

Meropenem kills bacteria by inhibiting the formation of the bacterial cell wall, which is essential for bacteria to survive. This action makes it bactericidal — meaning it destroys the bacteria rather than just stopping their growth.

Key Uses

Merofic Plus 500 mg Injection is commonly prescribed for treating:

• Severe skin and soft tissue infections
• Pneumonia (including ventilator‑associated)
• Urinary tract infections
• Bloodstream infections (sepsis)
• Meningitis (infection of membranes around the brain and spinal cord)
  These are caused by bacteria susceptible to meropenem, especially when other antibiotics are ineffective or inappropriate.

Administration

• Administered intravenously (IV), usually by infusion over a set time period depending on condition severity.
• Dosage and duration are decided by a physician based on the infection type and patient response.
• Should never be self‑administered.

Possible Side Effects

Common effects may include:

• Nausea, vomiting, diarrhoea
• Headache
• Injection‑site pain or swelling
• Rash or itch
  Most side effects are mild and temporary, but any severe or persistent symptoms should be reported to the treating doctor.

Important Safety Notes

• Prescription only: Use under medical supervision.
• Inform your doctor if you have kidney or liver disease, a history of seizures, or allergies to beta‑lactam antibiotics (e.g., penicillins/cephalosporins).
• Complete the full course of treatment as directed — stopping early may lead to antibiotic resistance.
• Regular monitoring may include kidney function tests and blood counts during therapy.

 

TICOFIC 200 – Teicoplanin Injection 200 mg

Brand Name: TICOFIC 200
Content: Teicoplanin Injection 200 mg
Company / Manufacturer: Gufic Lifescience Ltd (India)
Pack: Vial / Ampoule (as per supply)
Category: Glycopeptide Antibiotic / Injectable

Product Description

TICOFIC 200 contains Teicoplanin, a glycopeptide antibiotic used for the treatment of serious Gram-positive bacterial infections, including MRSA (Methicillin-resistant Staphylococcus aureus).

It is commonly used in hospital settings for severe infections such as bacteremia, endocarditis, bone & joint infections, and complicated skin or soft tissue infections.

Therapeutic Uses

• Treatment of serious Gram-positive bacterial infections
• Effective against MRSA and resistant Staphylococcus infections
• Management of bacteremia, endocarditis, osteomyelitis, and soft tissue infections
• Used in patients intolerant to vancomycin

Mechanism of Action

Teicoplanin inhibits bacterial cell wall synthesis, leading to bactericidal activity against susceptible Gram-positive organisms.

Administration

• Administered intravenously (IV) or intramuscularly (IM) by trained healthcare professionals
• Dose depends on type and severity of infection, patient weight, and renal function
• Monitor renal function and serum drug levels in prolonged therapy

Key Features

• Effective against MRSA and resistant Gram-positive bacteria
• Injectable formulation ensures rapid therapeutic effect
• Suitable for hospital and critical care use
• Comes in 200 mg vial for easy dosing

Possible Side Effects

• Mild: nausea, headache, injection site reactions
• Rare: nephrotoxicity, hypersensitivity reactions, skin rash
• Monitor for allergic reactions or kidney function impairment

Safety Notes

• Prescription-only medication — must be used under medical supervision
• Use cautiously in patients with renal impairment
• Store in a cool, dry place, protected from light
• Keep out of reach of children

BRAND : TICOFIC PLUS 400
CONTENT : TEICOPLANIN INJECTION 400MG
COMPANY : GUFIC LIFESCIENCE LTD

BRAND : LIDOFIX 2%-30ML 
CONTENT : LIGNOCAINE HYDROCHLORIDE INJECTION
COMPANY :VARENYAM HEALTHCARE PVT LTD

Product Name

Life Scan 76 Injection (Diatrizoate Meglumine & Diatrizoate Sodium Injection USP)

Product Description

Life Scan 76 Injection is a diagnostic contrast medium containing Diatrizoate Meglumine and Diatrizoate Sodium. It is commonly used in radiological imaging procedures to enhance the visibility of internal organs, blood vessels, and tissues during diagnostic examinations such as X-ray and other imaging studies.

This sterile injectable solution helps healthcare professionals obtain clearer and more detailed images for accurate diagnosis. It is widely used in hospitals, diagnostic centers, and radiology departments. The product is manufactured by Lifecare Pharmaceuticals under strict pharmaceutical quality standards to ensure safety, purity, and reliable performance.

Composition

·         Diatrizoate Meglumine Injection USP

·         Diatrizoate Sodium Injection USP

Dosage Form

Sterile Injection

Packaging

1 Vial – 20 ml

Key Features

·         Radiographic contrast medium for diagnostic imaging

·         Helps improve clarity of X-ray and radiology examinations

·         Sterile and high-quality pharmaceutical formulation

·         Suitable for hospital and diagnostic center use

·         Secure vial packaging for safe handling and storage

Manufacturer

Lifecare Pharmaceuticals

Storage

Store in a cool and dry place away from direct sunlight.

Usage To be administered only by qualified healthcare professionals during diagnostic procedures

Otski IV Injection Trace Elements is an intravenous (IV) nutritional supplement that contains a combination of essential trace minerals. It’s typically used in clinical settings for patients who cannot get adequate nutrition orally or through regular diet—especially those receiving parenteral nutrition (IV feeding).

Formulations may vary slightly, but trace element injections commonly include:

·         Zinc

·         Copper

·         Manganese

·         Selenium

·         Chromium

These minerals are needed in very small amounts, but they are essential for:

·         Immune system function

·         Wound healing

·         Enzyme activity

·         Antioxidant defense

·         Metabolism

Doctors may prescribe it for:

·         Patients on Total Parenteral Nutrition (TPN)

·         Severe malnutrition

·         Gastrointestinal disorders preventing absorption

·         Post-surgery recovery when oral intake isn’t possible

·         Long-term critical illness

·         It is not for self-administration unless specifically directed by a healthcare provider.

·         Doses must be carefully adjusted, especially in patients with kidney or liver disease, to prevent toxicity.

·         Monitoring of blood trace element levels may be required during prolonged use.

If you'd like, I can explain:

·         Possible side effects

·         Recommended dosing guidelines

·         How it differs from multivitamin IV formulations

·         Whether it’s appropriate for a specific condition

 

Product Name: BD PARIN 60 mg Injection
Generic Name: Enoxaparin Sodium Injection IP
Strength: 60 mg / 0.6 ml
Dosage Form: Pre-filled Syringe
Route of Administration: Subcutaneous
Brand: BD PARIN
Manufacturer: BDR Pharmaceuticals International Pvt. Ltd.
Packaging: Pre-filled syringe pack

Product Description:

BD PARIN 60 mg Injection contains Enoxaparin Sodium 60 mg/0.6 ml, a Low Molecular Weight Heparin (LMWH) used as an anticoagulant to prevent and treat blood clots. It helps reduce the risk of deep vein thrombosis (DVT), pulmonary embolism (PE), and clot-related complications in high-risk patients.

Enoxaparin works by inhibiting clotting factors, primarily Factor Xa, thereby preventing the formation and growth of blood clots. It is widely used in post-surgical patients, bedridden patients, and individuals with certain heart conditions.

Key Features:

·         Low Molecular Weight Heparin (LMWH)

·         60 mg / 0.6 ml pre-filled syringe

·         Effective anticoagulant therapy

·         Suitable for hospital and institutional use

·         Manufactured under strict pharmaceutical quality standards

Indications:

·         Prevention and treatment of Deep Vein Thrombosis (DVT)

·         Pulmonary Embolism (PE)

·         Acute Coronary Syndrome (ACS)

·         Prevention of clotting during hemodialysis

Storage:

Store below 25°C. Do not freeze. Protect from light.

Supply:

Available for hospital, pharmacy, institutional, bulk, and export supply.

Product Name: BD PARIN 40 mg Injection
Generic Name: Enoxaparin Sodium Injection IP
Strength: 40 mg / 0.4 ml
Dosage Form: Pre-filled Syringe
Route of Administration: Subcutaneous
Brand: BD PARIN
Manufacturer: BDR Pharmaceuticals International Pvt. Ltd.
Packaging: Pre-filled syringe pack

Product Description:

BD PARIN 40 mg Injection contains Enoxaparin Sodium 40 mg/0.4 ml, a low molecular weight heparin (LMWH) used as an anticoagulant (blood thinner). It helps prevent and treat harmful blood clots in the body by reducing clot formation.

Enoxaparin works by inhibiting clotting factors, primarily Factor Xa, thereby preventing deep vein thrombosis (DVT) and pulmonary embolism (PE). It is widely used in hospitalized patients, post-surgical cases, and patients with certain cardiac conditions.

Key Features:

·         Low Molecular Weight Heparin (LMWH)

·         40 mg / 0.4 ml pre-filled syringe

·         Effective anticoagulant therapy

·         Suitable for hospital and institutional use

·         Manufactured under high-quality pharmaceutical standards

Indications:

·         Prevention of Deep Vein Thrombosis (DVT)

·         Treatment of DVT and Pulmonary Embolism (PE)

·         Acute Coronary Syndrome (ACS)

·         Prevention of clotting during dialysis

Storage:

Store below 25°C. Do not freeze. Protect from light.

Supply: Available for hospital, pharmacy, institutional, bulk, and export supply

BRAND : LIDOFIX 2 ADRE
CONTENT : LIGNOCAINE ADRENALINE 
COMPANY : VARENYAM HEALTHCARE PVT LTD

Brand Name: LOX 2%
Generic Name: Lignocaine Hydrochloride Injection
Strength: 2% w/v
Dosage Form: Injection
Manufacturer: Neon Laboratories Limited
Packaging: Standard manufacturer packing

Product Description:

LOX 2% Injection contains Lignocaine Hydrochloride, a widely used local anesthetic for producing effective and rapid nerve block. It is commonly employed for local infiltration, peripheral nerve block, and minor surgical procedures to provide short-acting analgesia.

This formulation ensures reliable pain control with rapid onset and is suitable for use in hospitals, clinics, and dental practices.

Common Uses:

·         Local infiltration anesthesia

·         Peripheral nerve blocks

·         Minor surgical and dental procedures

·         Postoperative pain management

Key Features:

·         Fast-acting and reliable local anesthetic

·         Hospital-grade formulation suitable for institutional use

·         Manufactured under strict GMP quality standards

·         Provides safe and effective short-term anesthesia

Note: To be administered only by qualified healthcare professionals.

Brand Name: CEFACTAM-DS 1.5 G
Generic Name / Content: Cefoperazone & Sulbactam for Injection 1.5 g
Company: Aurobindo Pharma Ltd

CEFACTAM-DS 1.5 g Injection is a combination antibiotic containing Cefoperazone (a third-generation cephalosporin) and Sulbactam (a beta-lactamase inhibitor). This dual-action formulation provides broad-spectrum antibacterial activity and is effective against beta-lactamase–producing bacteria.

Cefoperazone inhibits bacterial cell wall synthesis, while Sulbactam prevents enzymatic degradation, enhancing overall efficacy. The formulation is designed for intravenous (IV) or intramuscular (IM) administration in hospital and clinical settings.

Indications

·         Respiratory tract infections (pneumonia, bronchitis, sinusitis)

·         Urinary tract infections (UTIs)

·         Skin and soft tissue infections

·         Bone and joint infections

·         Intra-abdominal infections

·         Septicemia and bacteremia

·         Gynecological infections

Key Features

·         Third-generation cephalosporin with beta-lactamase inhibitor

·         Broad-spectrum antibacterial coverage

·         Effective against resistant bacterial strains

·         Sterile injectable formulation

·         Manufactured by Aurobindo Pharma Ltd

Dosage Form & Category

·         Dosage Form: Injection (Vial)

·         Category: Injectable / Parenteral Antibiotic

·         Strength: 1.5 g per vial

·         Content: Cefoperazone + Sulbactam

Packaging & Storage

·         Supplied in sterile vial packaging

·         Store in a cool, dry place below 25°C

·         Protect from light

·         Use under qualified medical supervision

Brand Name: LOXICARD 2% 50ml
Generic Name: Lignocaine Hydrochloride Injection I.P.
Strength: 2% w/v
Dosage Form: Injection
Pack Size: 50 ml
Manufacturer: Neon Laboratories Limited

Product Description:

LOXICARD 2% 50ml Injection contains Lignocaine Hydrochloride, a widely used local anesthetic for producing rapid and effective nerve block. It is commonly employed for local infiltration, peripheral nerve blocks, and minor surgical procedures to provide short-acting analgesia.

This hospital-grade formulation ensures reliable pain control with fast onset, suitable for use in surgical, clinical, and dental settings.

Common Uses:

·         Local infiltration anesthesia

·         Peripheral nerve blocks

·         Minor surgical and dental procedures

·         Postoperative pain management

Key Features:

·         Fast-acting and reliable local anesthetic

·         High-quality hospital-grade formulation

·         Suitable for institutional supply

·         Manufactured under strict GMP quality standards

Note: To be administered only by qualified healthcare professionals

Product: CABOPROST 250 mcg/mL Injection

Brand Name: CABOPROST 250 mcg/mL
Content: Carboprost Tromethamine Injection I.P. – a sterile oxytocic/uterotonic solution.
Company / Manufacturer: Neon Lab Ltd / Neon Laboratories Ltd – Indian pharmaceutical company.
Pack: 1 mL ampoule containing 250 mcg carboprost tromethamine.

CABOPROST 250 mcg/mL Injection is a prescription injectable medicine containing Carboprost Tromethamine, a synthetic analogue of prostaglandin F2α with strong uterotonic (uterus‑contracting) activity. It is used in hospital and clinical settings under medical supervision to assist with obstetric and gynecological management where increased uterine muscle contraction is required.

🌟 Key Features

·         Active Ingredient: Carboprost Tromethamine I.P. (250 mcg per mL).

·         Dosage Form: Sterile injectable solution in a single‑dose ampoule.

·         Administration: Given intramuscularly (IM) by a healthcare professional in a hospital or clinic.

·         Prescription: Required – to be used only under clinician supervision.

🩺 Therapeutic Uses

CARBOPROST TROMETHAMINE Injection is primarily used for:

·         Controlling severe postpartum hemorrhage (excessive bleeding) after childbirth due to uterine atony.

·         Termination of pregnancy (medical abortion) in the second trimester (13–20 weeks) where other methods are insufficient or not appropriate.

·         Management of incomplete abortion by promoting uterine contractions.

It works by stimulating contraction of the uterine smooth muscle, facilitating hemostasis (stoppage of bleeding) and evacuation of the uterus.

⚠️ Important Notes & Safety

·         Administered Only by Medical Professionals: Should be given IM in a hospital with appropriate monitoring and resuscitation facilities.

·         Side Effects: May include nausea, vomiting, diarrhea, flushing, headache, fever/chills, abdominal cramps, and increased uterine contractions.

·         Precautions: Contraindicated or used with caution in patients with active cardiac, pulmonary, renal, or hepatic disease, and in those with known hypersensitivity to prostaglandins.

·         Storage: Typically stored in a refrigerator (2–8 °C) and protected from light; do not freeze.

·         Not for Self‑Administration: To be used only in clinical settings under supervision.

📌 Category :- Obstetric / Gynecological Injectable – Uterotonic / Oxytocic Agent

Brand Name: LEVO-ANAWIN 0.5%/4ml
Generic Name: Levobupivacaine Injection
Strength: 0.5% w/v
Dosage Form: Injection
Pack Size: 4 ml
Manufacturer: Neon Laboratories Limited

Product Description:

LEVO-ANAWIN 0.5%/4ml Injection contains Levobupivacaine, a long-acting amide-type local anesthetic. It is widely used for regional anesthesia, including epidural, spinal, and peripheral nerve blocks, providing effective pain relief during surgical, obstetric, and postoperative procedures.

Levobupivacaine is known for its high potency, prolonged duration of action, and reduced cardiovascular and central nervous system toxicity compared to racemic bupivacaine, making it a preferred choice in clinical anesthesia.

Common Uses:

·         Epidural anesthesia

·         Spinal anesthesia

·         Peripheral nerve blocks

·         Postoperative analgesia

·         Pain management in surgical procedures

Key Features:

·         Long-lasting anesthetic effect

·         High potency with reduced systemic toxicity

·         Hospital-grade formulation suitable for institutional supply

·         Manufactured under stringent GMP quality standards

Note: To be administered only by qualified healthcare professionals.

Product Title:
ENOXATROY 40 Enoxaparin Sodium Injection 40 mg (0.4 ml)

Category:
Pharmaceutical Medicines → Pharmaceutical Injection → Anticoagulant Injection

Brand Name:
ENOXATROY 40

Composition / Content:
Enoxaparin Sodium IP 40 mg

Pack Size:
1 x 0.4 ml Prefilled Syringe

Manufacturer:
Troikaa Pharmaceuticals Ltd

Dosage Form:
Injection

Product Description:
ENOXATROY 40 Injection contains Enoxaparin Sodium IP 40 mg, a low molecular weight heparin (LMWH) used as an anticoagulant to prevent and treat blood clots. It works by reducing the formation of clots in the blood, thereby lowering the risk of deep vein thrombosis (DVT), pulmonary embolism, and other thromboembolic conditions.

This injection is commonly used in hospitals and healthcare settings for patients undergoing surgery, those with restricted mobility, or individuals at high risk of clot formation. ENOXATROY 40 is supplied as a 0.4 ml prefilled syringe for convenient and accurate dosing and is manufactured by Troikaa Pharmaceuticals Ltd following strict pharmaceutical quality standards.

Key Features:

·         Composition: Enoxaparin Sodium IP 40 mg

·         Pack Size: 1 x 0.4 ml prefilled syringe

·         Category: Anticoagulant injection

·         Helps prevent and treat blood clots

·         Suitable for hospital and clinical use

Note:
This product should be used only under the supervision of qualified healthcare professionals.

Product Name: INNOMER 1000 Injection

Brand: INNOMER 1000 Injection
Content / Active Ingredient: Meropenem Injection 1000 mg
Company / Manufacturer: BDR Pharmaceuticals International Pvt. Ltd.
Pack Size: 1 Vial (Dry Powder for Injection)

Product Description

INNOMER 1000 Injection is a sterile injectable antibiotic formulation containing Meropenem 1000 mg, a broad-spectrum carbapenem-class antibiotic used for the treatment of serious and life-threatening bacterial infections.

It is supplied as a dry powder for reconstitution and intended for intravenous (IV) administration under the supervision of a qualified healthcare professional. Meropenem is highly effective against a wide range of Gram-positive and Gram-negative bacteria, including many resistant strains, making it suitable for hospital and critical care settings.

Key Features

·         Composition: Meropenem 1000 mg per vial

·         Therapeutic Category: Antibiotic – Carbapenem class

·         Dosage Form: Sterile dry powder for IV injection/infusion

·         Route of Administration: Intravenous use only

·         Prescription Status: Schedule H – Prescription medicine

·         Packaging: Single vial pack

·         Storage: Store in a cool, dry place below recommended temperature

Indications / Uses

INNOMER 1000 Injection is indicated for the treatment of:

·         Severe respiratory tract infections (including pneumonia)

·         Complicated urinary tract infections

·         Intra-abdominal infections

·         Skin and soft tissue infections

·         Septicemia (bloodstream infections)

·         Meningitis

·         Hospital-acquired infections

Dosage and duration should be determined by the treating physician based on the severity and type of infection.

How It Works

Meropenem works by inhibiting bacterial cell wall synthesis, leading to bacterial cell death. It is resistant to many beta-lactamases, making it effective against several resistant bacterial strains.

Important Notes

·         To be administered only by trained healthcare professionals.

· 

 

Product Title:
ENOXATROY 60 Enoxaparin Injection 60 mg

Category:
Pharmaceutical Medicines → Pharmaceutical Injection → Anticoagulant Injection

Brand:
ENOXATROY 60

Composition / Content:
Enoxaparin 60 mg Injection

Manufacturer:
Troikaa Pharmaceuticals Ltd

Dosage Form:
Injection

Product Description:
ENOXATROY 60 Injection contains Enoxaparin 60 mg, a low molecular weight heparin (LMWH) used as an anticoagulant to prevent and treat harmful blood clots. It works by inhibiting clotting factors in the blood, helping to reduce the risk of deep vein thrombosis (DVT), pulmonary embolism, and other clot-related conditions.

This injection is widely used in hospitals and healthcare settings for patients undergoing surgery, those with limited mobility, or individuals at risk of thromboembolic disorders. ENOXATROY 60 is manufactured by Troikaa Pharmaceuticals Ltd and supplied in sterile injectable form to ensure safety, effectiveness, and reliable anticoagulant therapy.

Key Features:

·         Composition: Enoxaparin 60 mg

·         Category: Anticoagulant Injection

·         Dosage Form: Sterile Injection

·         Used for prevention and treatment of blood clots

·         Suitable for hospital and clinical use

Note:
This medicine should be administered only under the supervision of qualified healthcare professionals.

 

VANCOTHEM 500 mg Injection

Composition: Vancomycin Hydrochloride 500 mg
Brand: VANCOTHEM
Manufacturer: Themis Medicare Ltd
Dosage Form: Lyophilized Powder for Injection

Product Overview

VANCOTHEM 500 mg contains Vancomycin Hydrochloride, a glycopeptide antibiotic used for the treatment of serious gram-positive bacterial infections. It is primarily indicated in severe infections where other antibiotics are ineffective or contraindicated.

This product is widely used in hospital settings, including ICU and critical care units, and is supplied strictly for institutional and medical use under professional supervision.

Key Features

·         Contains Vancomycin Hydrochloride 500 mg

·         Broad-spectrum activity against gram-positive organisms

·         Effective against MRSA infections

·         Sterile lyophilized powder

·         For intravenous infusion use

·         Supplied in secure vial packaging

Therapeutic Indications

·         Septicemia

·         Endocarditis

·         Osteomyelitis

·         Lower respiratory tract infections

·         Skin and soft tissue infections

·         MRSA-related infections

·         Post-surgical infections

Packaging & Storage

·         Pack Type: Glass vial

·         Strength: 500 mg

·         Storage: Store below recommended temperature as per label instructions

·         Route of Administration: Intravenous (IV) infusion

·         Schedule Drug: To be administered under medical supervision only

Suitable For

·         Government & Private Hospitals

·         ICU & Critical Care Units

·         Multispecialty Hospitals

·         Institutional Pharmaceutical Distributors

·         Tender & Rate Contract Supply

Brand: MCT-ROF 10 ML
Content: Propofol Injection
Company: Neon Lab Ltd

Product Description:
MCT-ROF 10 ML is a high-quality Propofol Injection formulated for anesthesia and sedation purposes. Manufactured by Neon Lab Ltd, this formulation ensures rapid onset and smooth recovery, making it ideal for clinical and surgical settings. It is prepared under stringent quality control standards, ensuring safety, efficacy, and consistency.

Key Features:

• Ready-to-use intravenous injection
• Provides rapid induction and maintenance of anesthesia
• Smooth recovery profile
• Manufactured under GMP-compliant facilities
• Packaged in 10 ML vials for precise dosing

Applications:

• General anesthesia induction and maintenance
• Sedation in intensive care units
• Procedural sedation for minor surgeries

Quality Assurance:
MCT-ROF 10 ML is produced with high-grade ingredients and undergoes rigorous testing to meet international standards, ensuring patient safety and optimal performance.

Packaging:
Available in 10 ML sterile vials with tamper-evident packaging.

Product Title:
TROYPERAZONE S 1.5 g Cefoperazone & Sulbactam Injection

Category:
Pharmaceutical Medicines → Pharmaceutical Injection → Antibiotic Injection

Brand:
TROYPERAZONE S

Composition / Content:
Cefoperazone & Sulbactam

Pack Size:
1.5 g Vial

Manufacturer:
Troikaa Pharmaceuticals Ltd

Dosage Form:
Injection

Product Description:
TROYPERAZONE S 1.5 g Injection is a combination of Cefoperazone, a broad-spectrum cephalosporin antibiotic, and Sulbactam, a beta-lactamase inhibitor. This combination works by inhibiting bacterial cell wall synthesis and preventing the degradation of the antibiotic by beta-lactamase enzymes, making it effective against a wide range of bacterial infections.

This injection is commonly used in hospitals and clinical settings for the treatment of serious infections, including respiratory tract infections, urinary tract infections, intra-abdominal infections, skin and soft tissue infections, and septicemia. TROYPERAZONE S is manufactured by Troikaa Pharmaceuticals Ltd under strict pharmaceutical quality standards to ensure safety, sterility, and efficacy.

Key Features:

·         Composition: Cefoperazone & Sulbactam

·         Dosage Form: Sterile Injection

·         Category: Antibiotic Injection

·         Used for treating bacterial infections

·         Suitable for hospital and clinical use

Note:
This product should be administered only under the supervision of qualified healthcare professionals.

. Troypenem 1000 mg Injection

Brand: TROYPENEM 1 GM
Content: Meropenem Injection I.P. 1 g
Company / Manufacturer: Troikaa Pharmaceuticals Ltd (India)

Description:
Troypenem 1 GM is a broad‑spectrum carbapenem antibiotic containing meropenem, used for the treatment of serious bacterial infections under medical supervision. It helps fight infections by inhibiting the formation of the bacterial protective cell wall, leading to bacterial death (bactericidal action).[[turn0search0]]

Key Uses:

• Treatment of severe bacterial infections including complicated skin/soft tissue infections, pneumonia, urinary tract infections, septicemia, and intra‑abdominal infections.[[turn0search0]]
• Effective in infections where resistant bacteria may be involved.[[turn0search1]]

How It Works: Meropenem disrupts bacterial cell wall synthesis, resulting in bacterial death and control of infection.[[turn0search0]]

Administration & Safety:

• Administered intravenously (IV) by a doctor or nurse.[[turn0search1]]
• Complete the full prescribed course even if symptoms improve.[[turn0search1]]
• Monitor kidney function and blood counts during therapy.[[turn0search1]]

Possible Side Effects:
Common side effects may include nausea, vomiting, diarrhoea, headache, rash, or injection‑site irritation

2. Troypenem 500 mg Injection 1

Brand: TROYPENEM 500 mg
Content: Meropenem Injection I.P. 500 mg
Company / Manufacturer: Troikaa Pharmaceuticals Ltd (India)

Description:
A lower‑strength formulation of Troypenem used similarly for moderate to serious bacterial infections when indicated by a clinician. Like the 1 g strength, it contains meropenem, a potent carbapenem antibiotic that acts against a wide range of bacteria by disrupting cell wall synthesis.[[turn0search1]]

Use & Administration:

• Given under medical supervision via IV infusion or injection.[[turn0search1]]
• Dosage and treatment duration depend on infection type and clinical judgment.[[turn0search1]]

Safety & Monitoring:

• Requires monitoring of renal function and blood parameters.[[turn0search1]]
• Complete the full course to reduce chances of resistance.[[turn0search1]]

General Notes (for both strengths):

• Prescription medicine: should only be used under doctor guidance.
• Not effective against viral infections.
• Inform your healthcare provider if you have liver/kidney disease, allergies to β‑lactam antibiotics, or history of seizures before starting treatment.

 

Teicobiotic 200mg Injection

Brand Name: TEICOBIOTIC 200
Content: Teicoplanin Injection I.P. 200 mg — a sterile antibiotic powder for injection.
Company / Manufacturer: Neon Laboratories Ltd (NEON) — Indian pharmaceutical manufacturer.
Pack: 1 Vial (powder for injection).

📌 Product Description (IndiaMART‑style)

TEICOBIOTIC 200 Injection is a prescription antibiotic injectable medicine formulated as a sterile dry powder containing 200 mg teicoplanin. It is used in clinical settings to treat serious bacterial infections, especially those caused by Gram‑positive organisms, including methicillin‑resistant bacteria and other resistant strains.

This product is supplied as a single vial of lyophilized powder, which must be reconstituted with sterile water for injection and administered by a healthcare professional via intravenous or intramuscular routes.

💊 Key Features

·         Active Ingredient: Teicoplanin I.P. 200 mg per vial.

·         Dosage Form: Sterile lyophilized powder for injection.

·         Administration: Given in a hospital or clinic setting under medical supervision.

·         Prescription Required: Yes — for treatment under a clinician’s guidance.

🩺 Therapeutic Use

TEICOBIOTIC 200 Injection belongs to the glycopeptide class of antibiotics and is used for treating serious bacterial infections in hospitalized patients, including conditions such as:

·         Skin and soft tissue infections (e.g., cellulitis).

·         Respiratory tract infections (e.g., pneumonia).

·         Urinary tract infections and kidney infections.

·         Bone and joint infections (osteomyelitis, septic arthritis).

·         Bloodstream infections (septicemia) and endocarditis.

⚠️ Important Notes & Safety

·         Administered by Professionals: Always given by a doctor or nurse.

·         Side Effects: May include injection‑site reactions (pain, redness), rash, fever, gastrointestinal effects and changes in blood counts.

·         Precautions: Inform your healthcare provider if you are pregnant, breastfeeding, allergic to antibiotics, or have kidney/liver issues. 📌 Category

📌 Category :- Antibiotic / Glycopeptide Antibacterial – Injectable

BRAND : MEDIJECT BUPI HEAVY 4 ML
CONTENT : BUPIVACAINE HYDROCLORIDE WITH DEXTROSE
COMPANY : MODI MUNDI PHARMA LTD
PACK : 1 X 5 AMPOULES

PRICE WILL BE NEGOTIABLE FOR BULK QUANTITY 

Cefoperazone and Sulbactam 

BRAND :- THEMICAINE 2% INJECTION
CONTENT :- LIGNOCAINE HYDROCHLORIDE INJECTION 30ML
COMPANY :- THEMIS
PACK :- 30ML VIAL

ENOXAPARIN SODIUM INJECTION 60MG.Established in 2022, Shivsrushti Surgimed Private Limited, made a well-recognized name as a Wholesaler, Trader of Pharmaceutical Tablets, Pharmaceutical Injection and More.

Vancotroy 500 mg Injection

Brand: VANCOTROY 500 mg
Content: Vancomycin Injection 500 mg I.P.
Company / Manufacturer: Troikaa Pharmaceuticals Ltd (India)
Form / Pack: Powder for infusion/injection – 500 mg vial (to be reconstituted and administered by IV infusion)

Product Description

Vancotroy 500 mg Injection is a glycopeptide antibiotic used to treat serious bacterial infections in hospitalized patients. It contains the active ingredient vancomycin, which is reserved for severe infections or infections caused by bacteria resistant to other antibiotics. The injection is given intravenously by healthcare professionals under medical supervision.

Vancomycin kills susceptible bacteria by inhibiting the formation of their protective cell wall, leading to bacterial death. This makes it effective against various Gram‑positive bacterial infections.

Key Uses

This antibiotic is typically prescribed for serious infections, including:

• Bloodstream infections (septicemia)
• Lower respiratory tract infections (e.g., pneumonia)
• Skin and soft tissue infections
• Bone and joint infections
• Endocarditis (infection of heart lining/valves)
• Intra‑abdominal infections when indicated by a clinician
• Surgical prophylaxis in high‑risk patients for methicillin‑resistant Staphylococcus aureus (MRSA) infections

How It Works

Vancomycin acts by blocking bacterial cell wall synthesis, making the bacteria unable to maintain structural integrity, which results in bacterial death (bactericidal action).

Administration

• Administered as an intravenous infusion (IV) by a doctor or nurse.
• Dose and duration are determined by the severity/type of infection and patient condition.
• Infusion must be slow — rapid infusion may cause reactions such as low blood pressure or “red man syndrome.”

Possible Side Effects

Patients may experience:

• Injection‑site reactions (pain, redness, swelling)
• Hypotension (low blood pressure), flushing
• Kidney function changes / renal toxicity
• Hearing changes (ototoxicity) in some cases
• Nausea, vomiting, fever
• Other effects like shortness of breath or chills may occur under supervision

Important Safety Notes

• Prescription‑only product — use strictly under medical supervision.
• Inform the clinician of allergies, kidney problems, hearing issues, or concurrent medications before starting therapy.
• Kidney function and blood levels may be monitored during treatment.
• Not effective against viral infections like cold or flu.

 

ZONEM 500 MG Injection – Imipenem & Cilastatin

Brand Name: ZONEM 500 MG
Composition: Imipenem 500 mg + Cilastatin 500 mg Injection IP
Manufacturer/Marketer: Aurobindo Pharmaceuticals
Dosage Form: Dry Powder for Injection
Packaging Type: Vial
Route of Administration: Intravenous (IV)
Prescription Required: Yes

Product Description:

ZONEM 500 MG Injection is a potent broad-spectrum antibiotic combination containing Imipenem and Cilastatin. Imipenem is a carbapenem antibiotic that works by inhibiting bacterial cell wall synthesis, while Cilastatin prevents the degradation of Imipenem in the kidneys, enhancing its efficacy and safety.

This injection is highly effective against severe and complicated bacterial infections, including multi-drug resistant gram-positive and gram-negative bacteria. ZONEM 500 MG is widely used in hospitals, ICU, and critical care settings.

Indications:

·         Severe respiratory tract infections

·         Complicated urinary tract infections

·         Intra-abdominal infections

·         Skin and soft tissue infections

·         Bone and joint infections

·         Septicemia

Key Features:

·         Broad-spectrum carbapenem + renal protection

·         Effective against resistant bacterial strains

·         Ideal for hospital and critical care use

·         Manufactured by a reputed pharmaceutical company

Storage Instructions:

Store in a cool, dry place below 25°C. Protect from light and moisture.

Note: To be administered only under the supervision of a qualified healthcare professional.

Category for IndiaMART:
Pharmaceutical Medicines > Anti Infective Drugs & Medicines > Antibiotic Injection

Product Name: BD-MICA 100 Injection

Brand: BD-MICA 100
Content / Active Ingredient: Micafungin Sodium for Injection 100 mg
Company / Manufacturer: BDR Pharmaceuticals International Pvt. Ltd.
Pack Size: 100 mg Vial (Lyophilized Powder for Injection)

Product Description

BD-MICA 100 Injection is a sterile antifungal formulation containing Micafungin Sodium 100 mg, an echinocandin-class antifungal agent used for the treatment of serious systemic fungal infections. It is supplied as a lyophilized powder for reconstitution and is intended for intravenous infusion under the supervision of a qualified healthcare professional.

Micafungin works by inhibiting the synthesis of β-(1,3)-D-glucan, an essential component of the fungal cell wall, leading to fungal cell death. It is widely used in hospital settings, particularly for patients with compromised immunity.

Key Features

·         Composition: Micafungin Sodium 100 mg per vial

·         Therapeutic Category: Antifungal – Echinocandin class

·         Dosage Form: Sterile lyophilized powder for IV infusion

·         Route of Administration: Intravenous use only

·         Prescription Status: Schedule H – Prescription medicine

·         Packaging: Single vial pack

·         Storage: Store in a cool, dry place below recommended temperature; protect from light

Indications / Uses

BD-MICA 100 Injection is indicated for:

·         Candidemia (Candida bloodstream infections)

·         Acute disseminated candidiasis

·         Candida peritonitis and abscesses

·         Esophageal candidiasis

·         Prophylaxis of Candida infections in high-risk patients

Dosage and duration of therapy should be determined by a qualified healthcare professional based on patient condition and infection severity.

How It Works

Micafungin inhibits fungal cell wall synthesis by blocking β-(1,3)-D-glucan formation, which weakens the fungal cell wall and leads to cell death.

Important Notes

·         To be administered only under medical supervision.

·         Liver function monitoring may be required during therapy.

·         Possible side effects include fever, nausea, vomiting, headache, elevated liver enzymes, and infusion-site reactions.

·         Use with caution in patients with hepatic impairment.

 

Brand Name: DEXTOMID 50 mcg
Generic Name: Dexmedetomidine Injection
Strength: 50 mcg/ml
Dosage Form: Injection
Manufacturer: Neon Laboratories Limited
Packaging: Standard manufacturer packing

Product Description:

DEXTOMID 50 mcg/ml Injection contains Dexmedetomidine, a highly selective alpha-2 adrenergic agonist used for sedation in intensive care and operative settings. It provides effective sedation, anxiolysis, and analgesic-sparing effects with minimal respiratory depression, making it ideal for controlled clinical administration.

This formulation is suitable for precise dosing in critical care, perioperative management, and procedural sedation.

Common Uses:

·         ICU sedation for mechanically ventilated patients

·         Procedural sedation

·         Sedation during surgery and perioperative care

·         Adjunct to anesthesia for controlled analgesia

Key Features:

·         Highly selective alpha-2 adrenergic agonist

·         Provides stable, cooperative sedation

·         Minimal respiratory depression

·         Hospital-grade formulation suitable for institutional supply

·         Manufactured under strict GMP standards

Note: To be administered only by qualified healthcare professionals in monitored clinical settings

Brand Name: DEXTOMID 100 mcg
Generic Name: Dexmedetomidine Injection USP
Strength: 100 mcg
Dosage Form: Injection
Packaging: Standard manufacturer packing

Product Description:

DEXTOMID 100 mcg Injection contains Dexmedetomidine, a highly selective alpha-2 adrenergic agonist indicated for sedation in intensive care units and procedural settings. It provides sedative, anxiolytic, and analgesic-sparing effects without causing significant respiratory depression when administered under proper medical supervision.

Dexmedetomidine is widely used in hospital settings for controlled sedation and perioperative management.

Common Uses:

·         ICU sedation for mechanically ventilated patients

·         Procedural sedation

·         Sedation in operative and critical care settings

·         Adjunct in anesthesia practice

Key Features:

·         Highly selective alpha-2 agonist

·         Provides cooperative sedation

·         Minimal respiratory depression

·         Suitable for hospital and institutional supply

Note: To be administered only by qualified healthcare professionals in monitored clinical

Product Name: XATRONEM 2.0 GM Injection

Brand: XATRONEM 2.0 GM
Content / Active Ingredient: Aztreonam for Injection USP – 2.0 GM
Company / Manufacturer: BDR Pharmaceuticals
Pack Size: 2 GM Vial (Dry Powder for Injection)

Product Description

XATRONEM 2.0 GM Injection is a sterile injectable antibiotic containing Aztreonam 2 g, a monobactam-class beta-lactam antibiotic primarily effective against Gram-negative aerobic bacteria. It is supplied as a lyophilized powder for reconstitution and is intended for intravenous or intramuscular administration under the supervision of a qualified healthcare professional.

Aztreonam is widely used in hospital and clinical settings for the treatment of serious bacterial infections, especially in patients who may be allergic to penicillin-class antibiotics.

Key Features

·         Composition: Aztreonam for Injection USP – 2.0 GM per vial

·         Therapeutic Category: Antibiotic – Monobactam class

·         Dosage Form: Sterile dry powder for injection

·         Route of Administration: IV or IM (as prescribed)

·         Prescription Status: Schedule H – Prescription medicine

·         Packaging: 2 GM single vial pack

·         Storage: Store below 30°C in a cool, dry place; protect from light

Indications / Uses

XATRONEM 2.0 GM Injection is indicated for the treatment of:

·         Lower respiratory tract infections

·         Urinary tract infections

·         Septicemia (bloodstream infections)

·         Skin and soft tissue infections

·         Intra-abdominal infections

·         Gynecological infections.

How It Works

Aztreonam works by inhibiting bacterial cell wall synthesis, leading to bacterial cell death. It has strong activity against aerobic Gram-negative bacteria and minimal activity against Gram-positive or anaerobic organisms.

Important Notes

·         To be administered only by trained healthcare professionals.

·         Complete the full prescribed course to prevent antibiotic resistance.

·         Possible side effects include nausea, diarrhea, rash, and injection-site reactions.

·         Use cautiously in patients with a history of beta-lactam allergy.